Licensed & Insured, in Visalia and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Visalia
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (559) 372-4538 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Visalia and surrounding areas · On-site visits included · Free estimate within 24h
Visalia Metal Roofing is a team of local certified professionals based in Visalia. We respond quickly in Visalia and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (559) 372-4538⭐⭐⭐⭐⭐ 4.9/5 · 295 verified Google reviews
“We needed a metal roof on our hay barn out on the east side and these guys knocked it out in about three days with a four-man crew. The corrugated panels went on straight and they cleaned up every last screw and scrap piece before they left. Really solid work for a rural ag building.”
Commercial & Agricultural Metal Roofing
“They installed a small standing seam roof over our front porch entry and it turned out way nicer than I expected. Took two days, and the flashing around where it meets the house is sealed up tight. Only gripe is they showed up a couple hours late the first morning, but the finished job speaks for itself.”
Metal Roof Installation
“Had a leak over our equipment shed and couldn't figure out where it was coming from. Visalia Metal Roofing did a full inspection and found a bad flashing detail by the ridge, fixed it and re-fastened a bunch of loose screws while they were up there. No more drips after the last rain.”
Metal Roof Repair
“Full standing seam install on our 2,400 square foot house and I couldn't be happier with how it came out. The color is exactly what we picked, the seams are crisp, and they finished right on the timeline they promised. Neighbors keep stopping to ask who did it.”
Standing Seam Metal Roofing
“Water was coming in around our chimney pipe every time it rained hard. They got out here fast, redid the flashing and sealed it up properly, and it's been bone dry through two storms since. Fair price and no runaround.”
Flashing, Chimney & Skylight Repair
“We did the retrofit over our old shingles instead of tearing everything off, and it saved us a ton of money and time. The crew laid down the new panels over the whole house in just a few days and the cleanup was spotless. Genuinely relieved we went this route.”
Metal Roof Over Shingles (Retrofit)
“Tore off our old failing roof and replaced it with a new metal one, and the difference is night and day. The house is quieter and cooler already. They walked me through the whole process and answered every question I had without making me feel dumb.”
Metal Roof Replacement
“We wanted the look of tile without the weight and cracking, so we went with stone-coated steel on our place. The installers were meticulous lining up the courses and the finished roof looks fantastic from the street. Took a little longer than quoted, but the quality made up for it.”
Stone-Coated Steel RoofingReal photos of our work in Visalia · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener metal roof installation | Starting at $8/sq ft | Includes underlayment, trim, and standard flashing; price rises with roof pitch and panel count |
| Standing seam metal roof installation | Starting at $12/sq ft | Hidden fasteners, raised seams, and full flashing; higher on two-story homes with valleys |
| Metal shingle or stone-coated steel installation | Starting at $11/sq ft | Stamped or textured panels with matching trim; HOA design review can add lead time |
| Complex or large-scale installation | On estimate | Multiple roof planes, skylights, and deck repair need an on-site look before pricing |
| Travel | Included | in Visalia and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (559) 372-4538, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation, standard roof | Starting at $10/sq ft | Includes panels, concealed clips, underlayment, and standard trim on an accessible single-story roof. |
| Standing seam with tear-off of existing roof | Starting at $12/sq ft | Adds removal and disposal of old shingles or tile plus deck inspection before install. |
| Complex roof with valleys, dormers, or skylights | On estimate | Cut-up rooflines and multiple penetrations need an on-site look to price accurately. |
| Standing seam over existing shingles (retrofit) | On estimate | Code limits existing layers; we verify deck condition and layer count before quoting. |
| Travel | Included | In Visalia and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (559) 372-4538, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard metal replacement, simple gable roof | Starting at $9/sq ft | Includes tear-off, decking inspection, underlayment and new panels; pitch and size move the price. |
| Complex roof with dormers, valleys and multiple planes | Starting at $12/sq ft | Includes extra flashing and detail labor; cut-up rooflines and steep pitches add hours. |
| Premium standing seam or stone-coated steel | Starting at $14/sq ft | Includes concealed fasteners or textured finish; material grade and color selection drive the rate. |
| Decking repair and rotten sheathing replacement | On estimate | Priced after tear-off exposes the deck; extent of rot and sheathing type set the final number. |
| Travel | Included | In Visalia and surrounding valley towns, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (559) 372-4538, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over existing shingles, basic panel | Starting at $7/sq ft | Covers underlayment, trim, and standard exposed-fastener panels over sound shingles. |
| Standing seam or stone-coated retrofit | Starting at $10/sq ft | Concealed fasteners or textured steel, plus upgraded trim and ridge detailing. |
| Deck repair and sheathing replacement | On estimate | Priced per sheet after inspection, since rot and soft spots vary by home age. |
| Complex roof geometry or two-story access | On estimate | Dormers, skylights, steep pitch, and staging needs change labor and material counts. |
| Travel | Included | In Visalia and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (559) 372-4538, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (screws, sealant, small penetration) | Starting at $450 | Covers a small scope of failed screws, resealed penetration, or one small panel swap on an accessible roof. |
| Panel replacement (dented or punctured) | Starting at $850 | Includes matching profile and gauge panel, new fasteners, and sealant, priced by panel count and pitch. |
| Flashing rebuild at chimney or skylight | Starting at $1,200 | Covers removal and rebuild of failed flashing, new sealant, and water test, priced by access and height. |
| Storm or wind damage repair | On estimate | Needs an on-site look to count damaged panels, check for hidden fastener failure, and document for insurance. |
| Travel | Included | In Visalia and surrounding areas, no separate call-out or mileage fee on the repair visit. |
| Estimate | Free | Response within 24h at (559) 372-4538, written scope, no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single leak at fastener or small flashing | Starting at $450 | Covers tracing one leak, replacing failed fasteners and resealing a small penetration on an accessible roof. |
| Flashing rebuild at chimney or skylight | Starting at $850 | Includes removing old caulk, rebuilding the flashing with new metal and proper laps, and water testing. |
| Standing seam panel or seam repair | Starting at $950 | For separated seams or damaged panels that need re-engagement and resealing on standing seam profiles. |
| Full roof screw replacement and re-fastening | On estimate | Priced per panel field after an on-site count of fasteners and washer condition across the whole roof. |
| Emergency tarping during a storm | Starting at $350 | Temporary tarp secured over the active leak area, credited toward the permanent repair when you book it. |
| Travel | Included | In Visalia and surrounding Tulare County areas, with no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot re-fastening (small area) | Starting at $750 | Covers replacing failed screws and cracked washers on one roof section, with material and labor included. |
| Full residential re-fastening | Starting at $1,800 | Replaces every fastener on a typical single-story exposed-fastener roof, including new UV-rated washers. |
| Oversized screw retrofit | Starting at $2,200 | Upsizes fasteners where panel holes have wallowed out, priced by roof size and number of enlarged holes. |
| Two-story or steep-pitch roof | On estimate | Pitch, height, and roof complexity drive labor time, so we need an on-site look before quoting. |
| Commercial or agricultural building | On estimate | Large panel counts and access equipment vary widely, so these jobs are quoted after inspection. |
| Estimate | Free | Response within 24 hours at (559) 372-4538, with a written scope and no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, simple carport or shed | Starting at $5.50/sq ft | Includes panels, fasteners, closures and basic flashings; pitch and tear-off move the price. |
| R-panel or 5V roof on a home or shop | Starting at $6.75/sq ft | Includes underlayment, edge metal and ridge caps; valleys and penetrations add labor. |
| Panel repair and re-fastening | Starting at $450 | New screws, washers and closures on sound panels; rust extent and access affect the total. |
| Retrofit over existing shingles | On estimate | Code limits existing layers, so we inspect the deck and layer count before quoting. |
| Travel | Included | In Visalia and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (559) 372-4538, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof replacement (tear-off) | Starting at $9/sq ft | Includes tear-off, deck inspection, underlayment and standard flashing; pitch and roof complexity move the price. |
| Metal shingle over existing shingles | Starting at $7/sq ft | Includes prep and overlay where code allows one existing layer; deck condition and layer count affect eligibility. |
| Metal shingle repair and re-fastening | From $350 | Covers small repairs, lifted shingles and flashing reseal; access height and damage extent move the number. |
| Complex or large-scale job | On estimate | Multiple valleys, skylights, chimneys and historic or HOA review need an on-site look before pricing. |
| Travel | Included | In Visalia and surrounding Tulare County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (559) 372-4538, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel re-roof (single layer tear-off) | Starting at $9/sq ft | Includes tear-off of one shingle layer, high-temp underlayment, standard flashing and cleanup. |
| Tile-profile or shake-profile upgrade | Starting at $11/sq ft | Premium textured profiles and colors cost more per square than standard stone-coated panels. |
| Two-story or steep-pitch install | Starting at $12/sq ft | Adds labor, staging and fall-protection setup on tall or steep Visalia homes. |
| Deck repair or sheathing replacement | On estimate | Priced after we strip the roof and see the actual condition of the sheathing. |
| Travel | Included | In Visalia and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (559) 372-4538, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent and detail work | Starting at $20/sq ft | Includes formed copper panels, soldered seams, and flashing for bay windows, porch roofs, and dormers |
| Full copper or zinc roof | Starting at $28/sq ft | Includes removal, underlayment, custom-fabricated panels, and soldered or concealed-fastener seams |
| Aluminum specialty panels | Starting at $18/sq ft | Includes formed aluminum panels and trim for accents, porch roofs, and low-slope transitions |
| Complex or historic home | On estimate | Historic profiles, tight valleys, and framing repairs need an on-site look before pricing |
| Estimate | Free | Response within 24h at (559) 372-4538, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective coating, single-story | Starting at $2.50/sq ft | Includes pressure wash, rust treatment, and one reflective topcoat on an accessible roof |
| Elastomeric coating system | Starting at $3.25/sq ft | Thicker film for older panels with seam wear, priced by square footage and rust severity |
| Rust treatment and repaint | Starting at $3.75/sq ft | Rust converter, primer, and color-matched topcoat where fasteners and edges have corroded |
| Complex or large-scale job | On estimate | Steep pitch, multi-story access, or heavy rust needs an on-site look before pricing |
| Travel | Included | In Visalia and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (559) 372-4538, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Chimney counterflashing repair | Starting at $600 | Includes removal of failed sealant, new custom-bent counterflashing and water test on a single chimney. |
| Skylight curb flashing rebuild | Starting at $850 | Covers new curb cap and step flashing tied into the surrounding roof course, priced by roof pitch and access. |
| Valley or sidewall flashing replacement | Starting at $700 | New valley metal or step flashing with underlayment, priced by linear feet and roof material. |
| Multiple penetrations or complex roof | On estimate | Several chimneys, skylights or dormers on a steep or tile roof need an on-site look before pricing. |
| Travel | Included | In Visalia and surrounding Tulare County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (559) 372-4538, no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Uplift clips and reinforced fastening | Starting at $1,200 | Covers clips and upgraded fasteners on one problem run; roof size and steep access move the price. |
| Reflective coating on one slope | Starting at $1,400 | Includes surface prep and reflective finish; panel type and square footage drive the final number. |
| Ash-resistant closures and sealing | Starting at $1,200 | Seals panel ends and closures; number of runs and attic access affect the quote. |
| Fastener replacement and re-fastening | Starting at $1,500 | New screws and sealing washers on exposed-fastener roofs; panel count and pitch set the scope. |
| Complex or large-scale job | On estimate | Multi-slope homes and commercial buildings need an on-site look before any number is given. |
| Estimate | Free | Response within 24h at (559) 372-4538, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and damage documentation | Free | Full roof walk, photo documentation and written repair scope, no obligation to book |
| Minor storm repair | Starting at $350 | Reseal flashing, replace fasteners or patch a small penetration, priced by access and pitch |
| Panel and flashing replacement | Starting at $850 | Replace damaged panels and flashing, cost moves with panel profile, color match and height |
| Limb strike or widespread wind damage | On estimate | Needs an on-site look to scope underlayment, panel runs and possible partial re-roof |
| Travel | Included | In Visalia and surrounding Tulare County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (559) 372-4538, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Free initial roof assessment | Free estimate | Drive-by and basic roof look, with a verbal condition summary and repair recommendation. |
| Full documented inspection | Starting at $150 | Photo report, slope-by-slope condition map, fastener and flashing check, written recommendation. |
| Leak-focused inspection | Starting at $195 | Targeted leak search with water testing at suspect flashings and penetrations. |
| Commercial or agricultural inspection | On estimate | Large-span and shop roofs need an on-site look at square footage and access before pricing. |
| Travel | Included | in Visalia and surrounding Tulare County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (559) 372-4538, no obligation to book the inspection. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless K-style gutter, standard run | Starting at $9/linear ft | Includes on-site forming, hidden hangers, end caps and one downspout per run. |
| Half-round gutter with strap brackets | Starting at $14/linear ft | Classic profile for older homes; price moves with run length and outlet count. |
| Oversized box gutter for long runs | Starting at $22/linear ft | High-volume formed gutter for farm buildings and long sheds; larger outlets add cost. |
| Full-run leaf guard add-on | Starting at $6/linear ft | Stainless or aluminum mesh over the whole run; price depends on roof access and pitch. |
| Complex or large-scale job | On estimate | Two-story steep roofs, multiple planes and fascia repair need an on-site look first. |
| Estimate | Free | Response within 24h at (559) 372-4538, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and written scope | Free estimate | On-site walk of the building, deck and flashing check, written scope at no cost. |
| Exposed-fastener panel repair or re-fastening | Starting at $450 | New screws and washers plus resealed laps; price rises with roof size and access. |
| Full commercial or ag re-roof | On estimate | Panel profile, gauge, insulation, flashing and deck condition set the final figure. |
| Retrofit over existing roof | On estimate | Depends on existing layers, deck soundness and local code limits on recover. |
| Travel | Included | In Visalia and surrounding Tulare County towns, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (559) 372-4538, with no obligation to book. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Visalia want a crew that understands the local building stock, not a call center reading a script. Visalia Metal Roofing is a network of licensed, bonded, and insured local contractors who install, replace, re-roof, and repair metal roofing across Visalia, Tulare, Exeter, Woodlake, and Lindsay. We work on everything from Craftsman bungalows near Oval Park to ranch homes off Mooney Grove and newer two-story subdivisions in North and West Visalia.
Our crews handle steep pitches, heavy tree cover, and high-elevation exposure, and we know the large stock of aging screw-down roofs around the valley floor where fasteners are backing out. If you need straight answers on a metal roof repair or a full replacement, call (559) 372-4538.
Most metal roof leaks in Visalia start at the fasteners. On 15 to 30 year old exposed-fastener roofs, the EPDM sealing washers under each screw dry out, shrink, and crack, letting water slip past the threads. Seams separate as panels expand and contract through hot valley summers and cool winters. Pipe boots fail, flashing pulls away at chimneys, skylights, and valleys, wind lifts panel edges, and fallen limbs puncture the metal. Each of these is a specific failure with a specific fix, not a mystery.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the entry point, rotting sheathing and soaking insulation before a stain shows up inside. That hidden damage is why we inspect the whole assembly, not just the wet spot. If the panels and finish are sound, a full screw replacement and re-fastening with new washers often restores a watertight roof for a fraction of replacement cost. When the metal itself is failing, we say so plainly and walk you through replacement versus repair.
For active leaks, separated seams, or storm damage, call (559) 372-4538 or request a free estimate. We diagnose the cause first, then recommend the least expensive fix that actually solves it.
We install the full range of metal systems: standing seam with concealed clips for a clean, premium roof with no exposed screws to maintain; corrugated and ribbed panel roofing as the economical workhorse for cabins, barns, and workshops; metal shingles and stone-coated steel for homeowners who want a traditional look; and copper and specialty metal for accents and historic profiles.
The honest comparison: standing seam costs more upfront but has no exposed fasteners to service, while screw-down costs less and needs its fasteners checked over the roof's life. When the deck is sound, metal roof over shingles (retrofit) is a legitimate option; when it is not, tear-off is the right call. We match the system to your home, not the other way around.
Metal roof installation in Visalia is typically quoted per square foot, while repairs are often flat-rate. Price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We frame all figures as typical ranges only, because final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a clearer picture, see our pricing page, then request a free estimate or free roof inspection so we can give you a real number for your home.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent. Coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We document conditions; we do not negotiate coverage or influence the outcome.
On permits: in most jurisdictions, a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also restrict panel profile and color. Requirements vary, always verify with the Visalia building or planning department before starting your project. For help documenting your roof or planning a replacement, contact us.
Ready to get started? Visalia Metal Roofing serves in Visalia and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Visalia · Response within 24h · No commitment · ☎ (559) 372-4538
Your Free Quote Request